Post by Mirror Image Racing on Feb 23, 2015 21:13:40 GMT -5
Red denotes 2016 rule change
Car Body/Dimensions
Any American Full-Size Pickup built post 1950
Wheel Base: Must be Factory Wheel Base "NO ALTERING "
Height: 4" inches Maximum
Length: Limited To Model Length "NO EXTENSIONS"
Width: 3.5" inches Maximum
Weight: 170.10 grams Maximum
4 axles & wheels must be installed on the side of the car body directly across from one another
No more than a 10 degree angle
Trucks must be a 1/25 scale model only (No Lexan Bodies)
The outside of the body maybe lightly sanded
No changing the Factory Profile
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, Etc
Front Bumpers, windshield, rear glass must be installed
Side chrome, side mirrors do not need installed
Door window glass is optional
Tailgates must installed, in the closed position
No concept, Ranchero, El Camino Trucks
Bed covers allowed
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA (post 2009 only) Custom Machined, Maximum Velocity, Awana, Pinecar
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering maybe removed on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Wheels can be trued to 2.0 gram
Wheels cannot be intentionally machined below 2.0 gram then add foreign material to bring back up to weight
Top 3 trucks and 2 random trucks maybe checked after race
Axles
Nail, Pin, Headless, Straight
Minimum Diameter .084
Lubricants
Any
The Following are Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Car Body/Dimensions
Any American Full-Size Pickup built post 1950
Wheel Base: Must be Factory Wheel Base "NO ALTERING "
Height: 4" inches Maximum
Length: Limited To Model Length "NO EXTENSIONS"
Width: 3.5" inches Maximum
Weight: 170.10 grams Maximum
4 axles & wheels must be installed on the side of the car body directly across from one another
No more than a 10 degree angle
Trucks must be a 1/25 scale model only (No Lexan Bodies)
The outside of the body maybe lightly sanded
No changing the Factory Profile
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, Etc
Front Bumpers, windshield, rear glass must be installed
Side chrome, side mirrors do not need installed
Door window glass is optional
Tailgates must installed, in the closed position
No concept, Ranchero, El Camino Trucks
Bed covers allowed
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA (post 2009 only) Custom Machined, Maximum Velocity, Awana, Pinecar
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering maybe removed on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Wheels can be trued to 2.0 gram
Wheels cannot be intentionally machined below 2.0 gram then add foreign material to bring back up to weight
Top 3 trucks and 2 random trucks maybe checked after race
Axles
Nail, Pin, Headless, Straight
Minimum Diameter .084
Lubricants
Any
The Following are Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.