Post by Ca$h Racing on Nov 17, 2015 17:53:40 GMT -5
Red denotes 2017 rule change
Car Body / Dimensions
Wheel Base: Any
Height: 3" inches Maximum
Length: 7" inches Maximum
Width: 2 3/4" inches Maximum
Weight: 143 grams Maximum
Additional materials maybe added as long as they meet the rules
Other types of materials may be used to construct your body and/or frame
4 axles & wheels must be installed on the side of the car body across from each other
Raised Wheel: Any 1.5 gram BSA, PineCar, Awana, Maximum Velocity allowed
Note
Wheels/Car must clear the following Dimensions
Track Center Rail Height: 1/4" inch (7mm)
Track center Rail Width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, PineCar, Awana, Maximum Velocity
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
Lettering must remain on the inside and outside of the wheels
Step removal, and hub coning is allowed
Bushings, Sleeves, Bearings allowed
Minimum Tread Width 7.5mm
Minimum wheel weight 1.5 grams including bearing, bushings, sleeves
Top 3 cars and 2 random cars maybe checked after the race
Axles
Type: Any
Lubricant
Any
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car
Car Body / Dimensions
Wheel Base: Any
Height: 3" inches Maximum
Length: 7" inches Maximum
Width: 2 3/4" inches Maximum
Weight: 143 grams Maximum
Additional materials maybe added as long as they meet the rules
Other types of materials may be used to construct your body and/or frame
4 axles & wheels must be installed on the side of the car body across from each other
Raised Wheel: Any 1.5 gram BSA, PineCar, Awana, Maximum Velocity allowed
Note
Wheels/Car must clear the following Dimensions
Track Center Rail Height: 1/4" inch (7mm)
Track center Rail Width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, PineCar, Awana, Maximum Velocity
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
Lettering must remain on the inside and outside of the wheels
Step removal, and hub coning is allowed
Bushings, Sleeves, Bearings allowed
Minimum Tread Width 7.5mm
Minimum wheel weight 1.5 grams including bearing, bushings, sleeves
Top 3 cars and 2 random cars maybe checked after the race
Axles
Type: Any
Lubricant
Any
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car
