Post by APR on Dec 17, 2012 8:18:51 GMT -5
Green denotes change for 2015
Car Body/Dimensions
Wheel Base: Any
Height: 3" inches Maximum
Length: 7" inches Maximum
Width: 2 3/4" inches Maximum
Weight: 5 ounces (141.7 grams) Maximum
Additional materials maybe added, as long as they meet the rules
Other types of materials may be used to construct your body, and/or frame
Note
Wheels/Car must clear the following Dimensions:
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, Maximum Velocity, Awana, Pinecar, Custom Machined
3 axles & wheels (guide pin can be used instead of 4th wheel)
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Tread Width 7.5mm
Maximum Diameter 31mm
Axles
Minimum Diameter .084
Nail, Pin, Headless, Straight
Lubricants
Any
Top 3 cars and 2 random cars maybe checked after the race
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Car Body/Dimensions
Wheel Base: Any
Height: 3" inches Maximum
Length: 7" inches Maximum
Width: 2 3/4" inches Maximum
Weight: 5 ounces (141.7 grams) Maximum
Additional materials maybe added, as long as they meet the rules
Other types of materials may be used to construct your body, and/or frame
Note
Wheels/Car must clear the following Dimensions:
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, Maximum Velocity, Awana, Pinecar, Custom Machined
3 axles & wheels (guide pin can be used instead of 4th wheel)
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Tread Width 7.5mm
Maximum Diameter 31mm
Axles
Minimum Diameter .084
Nail, Pin, Headless, Straight
Lubricants
Any
Top 3 cars and 2 random cars maybe checked after the race
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
