Post by Ca$h Racing on Dec 17, 2017 18:34:30 GMT -5
Red Denotes 2022 season rule changes
Car/Body Dimensions:
Wheel Base : ANY
Height: 3″ Maximum
Length: 7″ Maximum
Width: 2 3/4" Maximum
Weight: 143 Grams
4 Axles & Wheels must be installed to the side of the car body directly across from one another / No more than a 10 degree angle
Any material maybe used to construct car body and/or frame
Additional materials maybe added as long as they meet the rules
NO FENDERS, AERODYNAMIC MODIFICATIONS, you may use washers or body side plates as long as height or diam. is less than the size of the center hub dia. ONLY THE WHEELS AND AXLE CAN BE INSTALLED ON THE SIDES OF THE BODY OF THE CAR. Nothing can be installed on top or bottom of the car that would cover wheel openings. Both inner and outer of the wheel must be visible at all times with nothing obstructing the view.
Wheels must clear the following dimensions:
Track Center Rail Height : 1/4″
Track Center Rail Width : 1 5/8″
Axles: Any
Wheels: BSA (post 2009 only)
May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
Lettering must remain visible on the inside and outside of the wheel.
NO Wheel covers may be used
7.5mm Minimum Tread Width
Decorative edge maybe removed
Wheels weigh 1.5 grams minimum
Bearings allowed
Raised/lifted Wheel: BSA, Revell and Pinecar only, old or new style, 7.5 mm minimum tread width, no weight or diameter restrictions
Top 3 cars maybe checked in post race inspection
Car Builder and Name must be on bottom of car
Car/Body Dimensions:
Wheel Base : ANY
Height: 3″ Maximum
Length: 7″ Maximum
Width: 2 3/4" Maximum
Weight: 143 Grams
4 Axles & Wheels must be installed to the side of the car body directly across from one another / No more than a 10 degree angle
Any material maybe used to construct car body and/or frame
Additional materials maybe added as long as they meet the rules
NO FENDERS, AERODYNAMIC MODIFICATIONS, you may use washers or body side plates as long as height or diam. is less than the size of the center hub dia. ONLY THE WHEELS AND AXLE CAN BE INSTALLED ON THE SIDES OF THE BODY OF THE CAR. Nothing can be installed on top or bottom of the car that would cover wheel openings. Both inner and outer of the wheel must be visible at all times with nothing obstructing the view.
Wheels must clear the following dimensions:
Track Center Rail Height : 1/4″
Track Center Rail Width : 1 5/8″
Axles: Any
Wheels: BSA (post 2009 only)
May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
Lettering must remain visible on the inside and outside of the wheel.
NO Wheel covers may be used
7.5mm Minimum Tread Width
Decorative edge maybe removed
Wheels weigh 1.5 grams minimum
Bearings allowed
Raised/lifted Wheel: BSA, Revell and Pinecar only, old or new style, 7.5 mm minimum tread width, no weight or diameter restrictions
Top 3 cars maybe checked in post race inspection
Car Builder and Name must be on bottom of car
