Post by Ca$h Racing on Dec 17, 2017 18:54:36 GMT -5
Street PRO Red denotes 2019 rule changes
Car/Body Dimensions:
Wheel Base : Any
Height: 3″ Maximum
Length: 7″ Maximum
Width: 2-3/4″ Maximum
Weight: 143 grams
Wheels must clear following dimensions:
Track Center Rail Height : 1/4″
Track Center Rail Width : 1 5/8″
Axles:
Minimum diameter .084
Wheels: Open Plastic Type
May be sanded, polished, CnCed and/or lathed
The tread / contact surface must remain flat and parallel to the bore as humanly possible
No Angling, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing the tread surface
No less than 7.50mm tread width
(Wheels maybe checked with digital calipers if needed)
The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Glass or extremely fragile parts
d. Paint that is wet, smudges or extremely sticky
e. Bearings
f. Sharp objects, sandpaper or abrasives on the bottom of car
g. Axles and/or wheels attached to any device that mechanically or alters rotation and spin
h. Any part of the car to go beyond the starting peg
j. Propellants
Top 3 cars and 2 random cars maybe checked in post race inspection
Builder Name And Car Name must be on bottom of Car
Car/Body Dimensions:
Wheel Base : Any
Height: 3″ Maximum
Length: 7″ Maximum
Width: 2-3/4″ Maximum
Weight: 143 grams
Wheels must clear following dimensions:
Track Center Rail Height : 1/4″
Track Center Rail Width : 1 5/8″
Axles:
Minimum diameter .084
Wheels: Open Plastic Type
May be sanded, polished, CnCed and/or lathed
The tread / contact surface must remain flat and parallel to the bore as humanly possible
No Angling, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing the tread surface
No less than 7.50mm tread width
(Wheels maybe checked with digital calipers if needed)
The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Glass or extremely fragile parts
d. Paint that is wet, smudges or extremely sticky
e. Bearings
f. Sharp objects, sandpaper or abrasives on the bottom of car
g. Axles and/or wheels attached to any device that mechanically or alters rotation and spin
h. Any part of the car to go beyond the starting peg
j. Propellants
Top 3 cars and 2 random cars maybe checked in post race inspection
Builder Name And Car Name must be on bottom of Car
