Post by Ca$h Racing on May 7, 2013 19:57:26 GMT -5
Red denotes 2023
rule change
Time
Breakout time for stage 2: 2.983
Cars will run 2 outside lanes (red and Blue)
2 passes in each lane
4 run average time closest to breakout will be winner
Note: No testing cars on League track!
Car Body/Dimensions
American or Foreign (3D printed bodies allowed)
Wheel Base: Must be Factory Wheel Base "NO ALTERING "
Height: 4" inches Maximum
Length: Limited To Model Length "NO EXTENSIONS"
Length from front nose of car to center of rear axle: 7 1/2" maximum
Width: 3.5" inches Maximum
Weight: Minimum 143 grams 170.10 grams Maximum
4 axles & wheels must be installed in the wheel-weld area
Scale Model: Any (must fit size limits)
The outside of the body maybe lightly sanded
No changing the Factory Profile
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, Etc
Front Bumpers, rear bumpers, tail light's, windshield, rear glass must be installed
If convertible model, convertible top (soft top) must be installed
Side chrome, side mirrors do not need installed
Door window glass is optional
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm
Raised/lifted Wheel
BSA, Revell, Pinecar and MaxV
Wheels
Type: BSA new or old-style, Revell, Pinecar and MaxV
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering/markings must remain on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Wheel weigh: any
Axles
Nail head only
Minimum Diameter .084
Lubricants
Any
Top 3 cars and 2 random cars maybe checked in a post race inspection
The Following are Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car
rule change
Time
Breakout time for stage 2: 2.983
Cars will run 2 outside lanes (red and Blue)
2 passes in each lane
4 run average time closest to breakout will be winner
Note: No testing cars on League track!
Car Body/Dimensions
American or Foreign (3D printed bodies allowed)
Wheel Base: Must be Factory Wheel Base "NO ALTERING "
Height: 4" inches Maximum
Length: Limited To Model Length "NO EXTENSIONS"
Length from front nose of car to center of rear axle: 7 1/2" maximum
Width: 3.5" inches Maximum
Weight: Minimum 143 grams 170.10 grams Maximum
4 axles & wheels must be installed in the wheel-weld area
Scale Model: Any (must fit size limits)
The outside of the body maybe lightly sanded
No changing the Factory Profile
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, Etc
Front Bumpers, rear bumpers, tail light's, windshield, rear glass must be installed
If convertible model, convertible top (soft top) must be installed
Side chrome, side mirrors do not need installed
Door window glass is optional
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm
Raised/lifted Wheel
BSA, Revell, Pinecar and MaxV
Wheels
Type: BSA new or old-style, Revell, Pinecar and MaxV
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering/markings must remain on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Wheel weigh: any
Axles
Nail head only
Minimum Diameter .084
Lubricants
Any
Top 3 cars and 2 random cars maybe checked in a post race inspection
The Following are Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car
