Post by Ca$h Racing on Aug 27, 2019 7:58:34 GMT -5
Mid America
Red denotes 2022 rule change
Car Body / Dimensions
Wheel Base: Any
Height: 3" inches Maximum
Length: 7" inches Maximum
Width: 2 3/4" inches Maximum
Weight: 143 grams Maximum
4 axles & wheels must be installed on the side of the car body
No more than 45 degree angle
Raised/lifted Wheel: BSA and Revell only, old or new style. lettering required on inside and outside of wheel, 7.5 mm minimum tread width, no weight or diameter restrictions.
Clear aeroshields required
Additional materials maybe added as long as they meet the rules
Other types of materials may be used to construct your body and/or frame
Note
Wheels/Car must clear the following Dimensions
Track Center Rail Height: 1/4" inch (7mm)
Track center Rail Width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA Old or New Style and Revell
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering/markings must remain on the inside and outside of the wheels
Decorative edge maybe removed
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Axles
Type: Nail, Headless, Pin, Straight
Minimum Diameter .084
Lubricant
Any
Top 3 cars and 2 random cars maybe checked in post race inspection
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car
Red denotes 2022 rule change
Car Body / Dimensions
Wheel Base: Any
Height: 3" inches Maximum
Length: 7" inches Maximum
Width: 2 3/4" inches Maximum
Weight: 143 grams Maximum
4 axles & wheels must be installed on the side of the car body
No more than 45 degree angle
Raised/lifted Wheel: BSA and Revell only, old or new style. lettering required on inside and outside of wheel, 7.5 mm minimum tread width, no weight or diameter restrictions.
Clear aeroshields required
Additional materials maybe added as long as they meet the rules
Other types of materials may be used to construct your body and/or frame
Note
Wheels/Car must clear the following Dimensions
Track Center Rail Height: 1/4" inch (7mm)
Track center Rail Width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA Old or New Style and Revell
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering/markings must remain on the inside and outside of the wheels
Decorative edge maybe removed
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Axles
Type: Nail, Headless, Pin, Straight
Minimum Diameter .084
Lubricant
Any
Top 3 cars and 2 random cars maybe checked in post race inspection
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car