Post by Ca$h Racing on Aug 27, 2019 9:04:00 GMT -5
Rat Rod rules Note: Red indicates 2022 rules changes
Car Body/Dimensions
Wheel Base: Any
Height: Minimum of 1 1/2" inches from track to top of car (with wheels on)
Length: 6" inches Maximum
Width: 2 3/4" inches Maximum
Weight: 6 ounces/170.1 grams Maximum
Body Design
Main body structure maybe made from any type of material (3D printed allowed)
Car cannot be a slab/plank body style
Car must have a minimum area of "1" x 1" cube" somewhere in the design
Additional materials maybe added, as long as they meet the rules
Other types of materials may be used to construct your body, and/or frame
Aerodynamics allowed, such fenders,aero shields, etc.
Note
Wheels/Car must clear the following Dimensions:
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, Maximum Velocity, Awana, Pinecar, Custom Machined
4 axles & wheels must be installed on the side of the car body directly across from one another
No more than a 10 degree angle
Rears
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
Angled thread surface allowed
Lettering maybe removed on the inside and outside of the wheels
Step removal, and hub coning is allowed
Bushings, sleeves, bearings Maybe used
Minimum Thread Width 7.5mm
Front: Razor Wheels required
Unlimited rules apply
Axles
Nail, Pin, Headless, Straight
Lubricants
Any
Top 3 cars and 2 random cars will be checked after the race
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Last Edit: Aug. 27th by Ca$h Racing
Car Body/Dimensions
Wheel Base: Any
Height: Minimum of 1 1/2" inches from track to top of car (with wheels on)
Length: 6" inches Maximum
Width: 2 3/4" inches Maximum
Weight: 6 ounces/170.1 grams Maximum
Body Design
Main body structure maybe made from any type of material (3D printed allowed)
Car cannot be a slab/plank body style
Car must have a minimum area of "1" x 1" cube" somewhere in the design
Additional materials maybe added, as long as they meet the rules
Other types of materials may be used to construct your body, and/or frame
Aerodynamics allowed, such fenders,aero shields, etc.
Note
Wheels/Car must clear the following Dimensions:
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, Maximum Velocity, Awana, Pinecar, Custom Machined
4 axles & wheels must be installed on the side of the car body directly across from one another
No more than a 10 degree angle
Rears
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
Angled thread surface allowed
Lettering maybe removed on the inside and outside of the wheels
Step removal, and hub coning is allowed
Bushings, sleeves, bearings Maybe used
Minimum Thread Width 7.5mm
Front: Razor Wheels required
Unlimited rules apply
Axles
Nail, Pin, Headless, Straight
Lubricants
Any
Top 3 cars and 2 random cars will be checked after the race
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Last Edit: Aug. 27th by Ca$h Racing