Post by APR on Dec 17, 2012 8:24:13 GMT -5
Green denotes change for 2015
Car Body/Dimensions
Wheel Base: Must be Factory Wheel Base
Height: 2 3/4" inches Maximum
Length: 7" inches Maximum
Width: 2-3/4" inches Maximum
Weight: 5 ounces (141.7 grams) Maximum
Cars must be one of FiRENZE Custom Build Cars/Bodies
The outside of the body maybe lightly sanded
No changing the FiRENZE Body Profile
Bodies can be hollowed out for weight reduction
Axles Holes/Slots must remain as they came from FiRENZE no altering, filling and re-drilling is allowed
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, Etc
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, Custom Machined, Maximum Velocity, Awana, Pinecar
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering maybe removed on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Wheels can be trued to 2.0 gram
Wheels cannot be intentionally machined below 2.0 gram then add foreign material to bring back up to weight
4 axles & wheels must be installed on the side of the car body directly across from one another
No more than a 10 degree angle
Top 3 cars and 2 random cars maybe checked after race
Axles
Nail, Pin, Headless, Straight
Minimum Diameter .084
Lubricants
Any
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Car Body/Dimensions
Wheel Base: Must be Factory Wheel Base
Height: 2 3/4" inches Maximum
Length: 7" inches Maximum
Width: 2-3/4" inches Maximum
Weight: 5 ounces (141.7 grams) Maximum
Cars must be one of FiRENZE Custom Build Cars/Bodies
The outside of the body maybe lightly sanded
No changing the FiRENZE Body Profile
Bodies can be hollowed out for weight reduction
Axles Holes/Slots must remain as they came from FiRENZE no altering, filling and re-drilling is allowed
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, Etc
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, Custom Machined, Maximum Velocity, Awana, Pinecar
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering maybe removed on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Wheels can be trued to 2.0 gram
Wheels cannot be intentionally machined below 2.0 gram then add foreign material to bring back up to weight
4 axles & wheels must be installed on the side of the car body directly across from one another
No more than a 10 degree angle
Top 3 cars and 2 random cars maybe checked after race
Axles
Nail, Pin, Headless, Straight
Minimum Diameter .084
Lubricants
Any
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.