Post by Ca$h Racing on Jul 14, 2021 10:16:28 GMT -5
APR Spec Truck
Red denotes 2022 rule change
Truck Body/Dimensions
Derby Evolution truck body only
Wheel Base: Minimum 4.75" and wheels cannot extend past front of body
Length: 7" inches Maximum
Width: 3"1/2 inches Maximum
4 Axles & Wheels must be installed on the side of the car body directly across from one another
Weight: Maximum 143 grams
No additional materials maybe added, body maybe lightly sanded and painted only
Washers/slide guide and or aeroshields (clear only) is allowed
Rear weight pocket legs maybe removed for one piece weight placement
Bed covering is allowed
No fenders, rear spoiler, or any aerodynamic modifications allowed
Raised/lifted Wheel: BSA and Revell only, old or new style. lettering required on inside and outside of wheel, 7.5 mm minimum tread width, no weight or diameter restrictions
Wheels/Car must clear the following Dimensions:
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA new style (post 2009),Revell and MaxV
May be CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat, and parallel to the bore
Minimum Thread Width 7.5mm
Lettering must remain on the inside and outside of the wheels
Decorative edge maybe removed
Step Removal and Hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Axles
Type: nail head required
Minimum Diameter .084
Lubricants
Any
Top 3 cars and 2 random cars maybe checked in post race inspection
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.[/b]
Builder and car name must be on bottom of car
Red denotes 2022 rule change
Truck Body/Dimensions
Derby Evolution truck body only
Wheel Base: Minimum 4.75" and wheels cannot extend past front of body
Length: 7" inches Maximum
Width: 3"1/2 inches Maximum
4 Axles & Wheels must be installed on the side of the car body directly across from one another
Weight: Maximum 143 grams
No additional materials maybe added, body maybe lightly sanded and painted only
Washers/slide guide and or aeroshields (clear only) is allowed
Rear weight pocket legs maybe removed for one piece weight placement
Bed covering is allowed
No fenders, rear spoiler, or any aerodynamic modifications allowed
Raised/lifted Wheel: BSA and Revell only, old or new style. lettering required on inside and outside of wheel, 7.5 mm minimum tread width, no weight or diameter restrictions
Wheels/Car must clear the following Dimensions:
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA new style (post 2009),Revell and MaxV
May be CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat, and parallel to the bore
Minimum Thread Width 7.5mm
Lettering must remain on the inside and outside of the wheels
Decorative edge maybe removed
Step Removal and Hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Axles
Type: nail head required
Minimum Diameter .084
Lubricants
Any
Top 3 cars and 2 random cars maybe checked in post race inspection
Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.[/b]
Builder and car name must be on bottom of car