Post by Ca$h Racing on Nov 15, 2015 20:00:59 GMT -5
Red denotes 2023/2024 rule change
Car Body/Dimensions
Following Kits are allowed for Dragster class
1) Cosmic Charger
2) Stingaree
3) Digger
4) Black Beauty
5) Flying Wedge
Dragster Style Car
Wheel Base: minimum 6"
Height: 4" inches Maximum
Length: Limited To Model Length "NO EXTENSIONS"
Width: 3.5" inches Maximum
Weight: 170.10 grams Maximum
4 axles & wheels must be installed on the side of the car body
raised wheel minimum diameter .750
Scale Model: Any ( must fit size limits)
The outside of the body maybe modified
Altering Body allowed (wheel-welds, Rear Bumper Removal, closing in Air Cavities, etc.)
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, Etc
Windshield, rear glass must be installed
Side chrome, side mirrors do not need installed
Door window glass is optional
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm
Rear Wheels
Type: BSA new style, Revell
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering and spokes maybe removed on outside of the wheels
Lettering must remain on inside of wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
No minimum weight requirement
Front Wheels:
Razor style only .750 minimum diameter (eliminator type wheels)
Raised wheel minimum diameter .750
Top 3 cars and 2 random cars maybe checked after race
Axles
Nail,Pin, Headless, Straight
Minimum Diameter .080
Lubricants
Any
The Following are Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car
Car Body/Dimensions
Following Kits are allowed for Dragster class
1) Cosmic Charger
2) Stingaree
3) Digger
4) Black Beauty
5) Flying Wedge
Dragster Style Car
Wheel Base: minimum 6"
Height: 4" inches Maximum
Length: Limited To Model Length "NO EXTENSIONS"
Width: 3.5" inches Maximum
Weight: 170.10 grams Maximum
4 axles & wheels must be installed on the side of the car body
raised wheel minimum diameter .750
Scale Model: Any ( must fit size limits)
The outside of the body maybe modified
Altering Body allowed (wheel-welds, Rear Bumper Removal, closing in Air Cavities, etc.)
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, Etc
Windshield, rear glass must be installed
Side chrome, side mirrors do not need installed
Door window glass is optional
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm
Rear Wheels
Type: BSA new style, Revell
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering and spokes maybe removed on outside of the wheels
Lettering must remain on inside of wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
No minimum weight requirement
Front Wheels:
Razor style only .750 minimum diameter (eliminator type wheels)
Raised wheel minimum diameter .750
Top 3 cars and 2 random cars maybe checked after race
Axles
Nail,Pin, Headless, Straight
Minimum Diameter .080
Lubricants
Any
The Following are Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car