Post by Ca$h Racing on Jan 15, 2014 8:24:08 GMT -5
Red denotes 2017 rule change
Car Body/Dimensions
Any American muscle Car
Wheel Base: Factory
Height: 4" inches Maximum
Length: Limited To Model Length "NO EXTENSIONS"
Width: 3.5" inches Maximum
Weight: 170.10 grams Maximum
Scale Model Any (must fit size limits)
No lexan Bodies
The outside of the body maybe lightly sanded
Altering Body allowed (wheel-welds, rear bumper removal(all other factory installed items must be in place)
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, etc.
Windshield, rear glass must be installed
If model was a convertible, Convertible top (soft top) must be installed
Side chrome, Mirrors, Trim does not have to be installed
Door window glass is optional
4 axles & wheels must be installed in wheel-weld area
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, Custom Machined, Maximum Velocity, Awana, Pinecar
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering maybe removed on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Wheels can be trued to 2.0 gram
Wheels cannot be intentionally machined below 2.0 gram then add foreign material to bring back to weight
Top 3 cars and 2 random cars maybe checked after race
Axles
Nail,Pin, Headless,Straight
Minimum Diameter .084
Lubricants
Any
The Following are Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car
Car Body/Dimensions
Any American muscle Car
Wheel Base: Factory
Height: 4" inches Maximum
Length: Limited To Model Length "NO EXTENSIONS"
Width: 3.5" inches Maximum
Weight: 170.10 grams Maximum
Scale Model Any (must fit size limits)
No lexan Bodies
The outside of the body maybe lightly sanded
Altering Body allowed (wheel-welds, rear bumper removal(all other factory installed items must be in place)
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, etc.
Windshield, rear glass must be installed
If model was a convertible, Convertible top (soft top) must be installed
Side chrome, Mirrors, Trim does not have to be installed
Door window glass is optional
4 axles & wheels must be installed in wheel-weld area
Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4" inch (7mm)
Track center rail width: 1 5/8" inches (4.2cm)
Wheels
Type: BSA, Custom Machined, Maximum Velocity, Awana, Pinecar
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering maybe removed on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore
Minimum Thread Width 7.5mm
Wheels can be trued to 2.0 gram
Wheels cannot be intentionally machined below 2.0 gram then add foreign material to bring back to weight
Top 3 cars and 2 random cars maybe checked after race
Axles
Nail,Pin, Headless,Straight
Minimum Diameter .084
Lubricants
Any
The Following are Reasons for Disqualification
Magnets, starting or finish line devices, electronic or lighting, glass, fragile parts, wet paint, sticky material or substances, sharp objects, sandpaper, parts beyond the starting peg, propellants, wheels and axles attached to mechanical rotating devices.
Builder and car name must be on bottom of car
